Aidele/ADL HSE-10 * 40ZN6.5-3A Localization ASP-134486-01

Replacement of ASP-134486-01 Products

Model: HSE-10 * 40ZN6.5-3A

Replacement of ASP-134486-01 Products

FMC connector, high speed connector

Replacement of FMC connector ASP-134486-01 from Samtec

    FMC connector is a high-density high-speed connector designed by Samtec Company in the United States to be used as a standard interface to FPGA on a carrier card: one is a low pin count (LPC) connector with 160 pins, and the other is a high pin count (HPC) connector with 400 pins. Both connectors support single-ended and differential signaling rates up to 2 Gb/s, and up to 10 Gb/s to the FPGA serial connector.

Both HPC and LPC connectors use the same mechanical connector. The only difference is which signals are actually transplanted. Therefore, cards with LPC connectors can also be inserted into HPC, and as long as they are properly designed, HPC cards can also provide many derivative functions when inserted into LPC. In addition, in addition to 68 user-defined single-ended signals or 34 user-defined differential interfaces, the LPC connector also provides a serial transceiver, clock, JTAG interface, and an I2C interface as optional support for basic Intelligent Platform Management Interface (IPMI) commands. The HPC connector provides 160 user-defined single-ended signals (or 80 user-defined differential pairs), 10 serial transceiver pairs, and more clocks.

   Products produced by Aerox ElectronicsHSE-10 * 40ZN6.5-3A is of good quality and meets FMC standards. It can be replaced with ASP-134486-01 and meets the requirements of localization.

• 高速连接器