How to protect and customize a cable company's cables

Needless to say, the importance of wires and cables, if the quality of the cables used is not good, it will lead to poor engineering quality and even threaten the safety of everyone's lives and property. For this reason, some places will find custom cable companies to customize some suitable cables during construction. So, when the cable custom back should be how to protect and store it? The following is a reputable custom cable company to introduce.

1. Avoid contact with harmful cables and corrosive substances

The number of cables that need to be used during construction will be relatively large, and a large number of cables need to be stored in a good environment after being customized from the custom cable company. In the process of storage, the cable should be avoided and harmful cables put together, such as tinned copper wire or bare copper wire. In addition, do not let the cable contact with acid and alkaline and mineral oil and other corrosive substances contact.

2. Rolling cable drum regularly

The cables produced by the custom cable company usually use the cable reel to wind them. During the storage process, the cables will be affected to a certain extent by the protective sleeve and the reasons for storage extrusion. In order to reduce the adverse effects, the custom cable company recommends that everyone roll the cable reel regularly. When rolling, turn the original downward coil edge upward and check whether the cables are in good condition after rolling.

3. Do not lay the cable flat

In the process of preservation, do not lay the cables produced by the custom cable company flat, otherwise the insulation layer or protective sleeve of the cable will be worn to a certain extent, and the arrangement of the cables will be confused and lead to the quality of cable transmission. In addition, do not throw it when you need to handle the cable to avoid cracking of the insulating layer or protective sleeve.

Good quality and good reputation of custom cable company in the above to introduce some good ways to protect and store custom cable. The reason why the whole article is used to introduce the cable is a key factor affecting the construction quality of the whole power project. When the cable is purchased from the custom cable company, it must be protected to avoid damage to the cable during storage.